1 Channel 5V Relay Module

Description

1 Channel 5V Relay Module is a convenient board that can be used to control high voltage, high current loads such as motors, solenoid valves, lamps, and AC loads. It is designed to interface with microcontrollers such as Arduino, PIC, etc. The relay terminal (COM, NO, and NC) is being brought out with a screw terminal. It also comes with an LED to indicate the status of the relay. This is a Single Pole Double Throw (SPDT) Configuration relay.

Specification:

• Number of I/O Channels: 1
• DC 5v Relay Use
• Any Brand Relay Can Be use
• Switching capacity available by 10A despite small size design for high-density P.C. board mounting technique.
• Control signal: TTL level
• Max. Allowable Voltage: 250VAC/110VDC
• Max. Allowable Power Force: From C(800VAC/240W), From A(1200VA/300W)
• UL, CUL, and TUV were recognized.
• Indication LED for Relay’s Status
• VCC: Power interface, V
• GND: Ground
• IN: Control interface. Drive Current at least 4mA
• COM: Control circuit ground, Connect to GND
• Single Size: approx. 44 x 6 x 6mm

Features:

• This module is in line with international safety standards, the control area and the load area have isolation tanks;
• The use of pine music authentic relay;
• With power supply and relay indicator, pull off bright, bright;
• The signal input signal, the public side and often start will lead;
• Can be used as a microcontroller development board module, can be used as a home appliance control;
• Control the DC or AC signals, can control the 220V AC load;
• There is a normally open and a normally closed contact;
• A blue terminal connected to the control line is more convenient.
• Easy to use, each set of output 3 line structure simple, reserved 6 output terminal;
• Input directly connected to the microcontroller IO port or digital circuit, the input high
• Can be used as a microcontroller development board module can be used as a home appliance control
• A power indicator light
• A control indicator, pull-off, and disconnect do not shine
• The control pin has a pull-down circuit to prevent malfunctioning relay vacantly

Note:

• 1. High-level flip-flops show that there are trigger modes of the voltage between the signal input terminal and the ground; That is to say it is a way of short circuit trigger between signal input and VCC positive pole.
• 2. Low-level flip-flops show that there is voltage for OV trigger mode between the signal input terminal and the ground. In a word, it is a way of short circuit trigger between signal input and GND negative pole.
• 3. Please allow -mm differences due to manual measurement.
• 4. Due to the different displays and different lights, the picture may not reflect the actual color of the item. Thanks for your understanding.

Package includes:

• 1 x Relay Module DC 5V Single Channel Relay Module With Screw Terminal