Logic Level Converter TSB

৳ 145.00

  • Logic Level Converter TSB
  • Compatible logic levels between 1.8V to 5.5V
  • Made in China
Chinese Logo


Your 3.3V devices like gyro or SD card might go up in smoke if directly connected to a 5V Arduino board. Similarly, your Raspberry Pi will get damaged if connected to a 5V device directly. To get over these issues you need a device that can safely shift 3.3V signals up to 5V or 5V signals down to 3.3V. This four-channel bi-directional logic level converter is such a device. It can simultaneously shift 4 signals from 3.3V to 5V or vice versa. It also works with 2.8V and 1.8V devices.

This level converter is very easy to use. The board needs to be powered from the two voltage sources that your devices are using. Connect high voltage (5V for example) to the ‘HV’ pin, and low voltage (3.3V for example) to ‘LV’. Connect ‘GND’ pins from both of the devices together and you are ready to use it.

  • Compatible logic levels: any voltage level between 1.8V to 5.5V.
  • The maximum baud rate for serial communication: is 115200.
  • Tested to work with I2C and SPI communication.
  • Number of channels: 4
  • In bi-directional communication, data can be sent from the Low voltage side to the high-voltage side and vice versa.
  • Application: use it to connect your Arduino to Raspberry Pi, digital gyro, accelerometer & compass, SD cards, external EEPROM, EGBT-045 Bluetooth board, etc.



Good quality Chinese scientific and technical products are available under this category.
Chinese Logo


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.