500mL Separating Funnel Pyrex India

PYREX 500ml separating funnel has a PTFE (Polytetrafluorethylene) leakproof stop cock. Pyrex Separating Funnel is the best quality and most famous separating funnel in Bangladesh. 500 ml Pyrex separating funnel most used in school-college, different industrial laboratories in Bangladesh. Labtex provides the best quality 500 ml glass-made separating funnel at a reasonable price in Bangladesh.

A 500 mL separating funnel is a piece of laboratory equipment used for liquid-liquid extraction, which is a technique to separate immiscible liquids (liquids that do not mix, such as oil and water) or to separate substances from a solution based on their differing solubilities in different solvents.

Key Features of a 500mL Separating Funnel:

1. Capacity: The funnel can hold up to 500 mL of liquid, making it suitable for small to medium-scale extractions.
2. Shape: Typically a pear-shaped or cylindrical glass container with a narrow neck, a stopcock (valve) at the bottom for controlled liquid release, and a wide opening at the top for adding and mixing liquids.
3. Stopcock: This is used to drain the heavier phase (usually the denser liquid) from the bottom while leaving the less dense phase at the top.
4. Ground Glass or Plastic Stopper: To seal the top opening and prevent spills during shaking.

Common Uses of 500mL Separating Funnel:

• Extraction: To separate compounds based on their solubility in different solvents.
• Purification: Removing impurities from a desired liquid phase.
• Decantation: Separating two immiscible liquids with different densities.

How It Works:

1. Fill: You add two immiscible liquids (for example, water and an organic solvent) into the funnel.
2. Shake: The funnel is closed with a stopper, and the liquids are shaken. The goal is to mix the liquids thoroughly to allow the extraction of a desired compound from one phase into the other.
3. Allow to Settle: After shaking, the liquids will separate into two layers due to their differing densities (the heavier liquid, typically water, will sink to the bottom, and the lighter one will float).
4. Drain: You open the stopcock to drain the bottom layer into a separate container. The top layer can then be poured out.

Tips:

• Always ensure that the stopcock is tightly closed before shaking.
• Allow the funnel to rest for a few moments to ensure complete separation of the layers.
• If the liquids form an emulsion, gently tap the funnel or let it sit longer to allow better separation.

Separating funnels come in various sizes, and the 500 mL version is quite common in laboratory settings for both educational and small-scale extraction processes.