Mega Kitchen and Laboratory Scale 6Kg iNSAF-M060

Thank you for choosing our company’s electronic kitchen and Laboratory Scale 6Kg iNSAF-M060, to use correctly this product to ensure its accuracy and life, be sure to carefully read the instructions before use.

Features of the Laboratory Scale 6Kg iNSAF-M060

1. Weighing index value: 6kg/0.1g
2. Readability: 0.1gm to 6000gm
3. Maximum Capacity: 6Kg
4. The automatic zero function
5. Automatic shutdown function
6. g, TL, LB, OZ, ML units conversion function
7. With counting function
8. With functions of temperature
9. With functions of the clock
10. Have the countdown function
11. A charging indicator for full light
12. Has the level display
13. The lithium battery and dual power supply ordinary dry cells

Operational Steps of Mega Kitchen and Laboratory Scale 6Kg iNSAF-M060:

• Step 1: Keep the kitchen scale on a stable platform, to maintain a level state
• Step 2: Press the “Power On / Off” key to display “0” after 3 seconds
• Step 3: Place the item in the middle area of the weighing pan, and the display will show the weight of the item
• Horizontal instruction: In the level, the small bubble does not deviate completely from the small black circle, indicating that the electronic scale has been placed horizontally.

Temperature:

The lower right corner of the display shows the temperature (Note: For accurate temperature, you need to use it in the environment after 10 minutes to reboot, the current ambient temperature).

Counting Function:

In the normal startup state, the long press “zero” key appears as “25” and the “PCS” flickers in the lower right corner of the display screen. Press the “unit” key to select the values, such as “25”, “50”, “75” and “100”, select “50” place the same number of items on the scale, and then press the “reset” button to confirm. The display window appears “PASS”. Indicates that the number has been completed. Can carry on quantity weighing.

Countdown function:

Under the conditions of the normal boot, long press the “stop/ /start” button, MIN start flickering, short press the “unit” MIN increase Settings, or short press the “reset” key to MIN reduce Settings. When finished, press the “stop/start” button, and the SEC starts flashing, short press the “unit” button for the SEC setting, or short press the “reset” button to reduce the SEC setting. When
finished, press the “stop/start” button to exit the Settings, and the countdown setting is completed. In the countdown timer process, if you need to pause press the “stop/start” button, and the countdown is suspended. If you need to reply to the countdown, press the stop/start button.

Clock function:

1. Press “stop/start” when the boot is fully displayed. The hour begins to flicker, the short press “unit” key to increase the setting, or the short press “zero” key to reduce the setting of the hour. When finished, press the “stop/start” button, and the minutes begin to flicker, press the “unit” button to set the minutes, or press the “zero” button to reduce the setting. When
   finished, press the “stop/start” button to exit the Settings, and the clock setting is completed.
2. Adjust the clock function by pressing the “open/off” key, and in the full display state, the long press “stop/start” button is performed according to 1 procedure.
3. Turn OFF the clock function – press the “on/OFF” key, and press “zero” until the “zero” button appears in full display. The Settings are completed

Overload reminder:

When weighing in the “O-ld”, it means that the current weight exceeds the maximum weight of the product to remove the weight immediately to avoid damage to the scale.

Low voltage hint:
LO or [=] flicker, indicates that you need to replace the dry battery or charge the lithium battery.

Precautions to use of Kitchen and Laboratory Scale 6Kg iNSAF-M060:

1. When using the electronic scale should be placed horizontally, and can not be used in a vibrating environment.
2. It is strictly prohibited to overload, prohibited impact electronic scales with heavy objects.
3. Prohibited for rain, washing, can’t fall from the height of electronic scales.
4. When the “LO” indicator appears, the battery voltage is too low. Replace the battery immediately.
5. Please use in the range of 0°C ~40 ‘C, to avoid the temperature change being too large an environment
6. The electronic scale is a precision instrument when the things put on the tray, do not force the tray pressure.
7. When the electronic scale is in the work state, do not move the scale body, so as not to affect the accuracy of weighing.
8. When the surface of the electronic scale is stained, wipe it with a damp cloth. Do not use any chemicals
9. Do not disassemble the user to repair their electronic scale, if any fault, please contact your local dealer or supplier.